Print Mark Contrast Sensor DK20-9,5/B/110/124 Ahmedabad
Details of Print Mark Contrast Sensor DK20-9,5/B/110/124
Product Description
Print mark contrast sensor, 9.5 mm detection range, RGB light with circular light spot, light/dark on, external Teach-in, push-pull output, M12 plug
General specifications
Sensor range 9.5 mm ± 3 mm
Light source LED
Light type Visible green/red/blue, modulated light
Light spot representation Light spot diameter 1.5 mm
Functional safety related parameters
MTTFd 650 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Function indicator LED yellow; switching operation: lights up if print mark is detected
Teach-In operation: flashing slowly
alarm display: flashing quickly, if no safe operation is possible
Control elements Teach-In key
Electrical specifications
Operating voltage 10 ... 30 V DC
Output
Switching type light/dark on switchable, results from the order of the Teach-In
Signal output Push-pull output, short-circuit protected, reverse polarity protected
Compliance with standards and directives
Standard conformity
Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007
Shock and impact resistance IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistance IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Mechanical specifications
Degree of protection IP67
Connection 5-pin, M12 x 1 connector
Material
Housing PC (glass-fiber-reinforced Makrolon)
Optical face glass
Offered Product
